12
ASSEMBLY
Assemble the lift arm
ASSEMBLY
Secure with the hair pin (item 3).
Tighten all the bolts.
If there is interference between the pivot support and
the tractor heat shield, replace with the heat shield
(item 4) supplied.
NOTE:
If the original heat shield is bolted to the front
of tractor frame, detach the top part (item 6) of the
heat shield supplied by folding it up and down along
the dotted line.
Be careful not to cut yourself on the sharp edges. For
your safety sand down the sharp edges.
Use the tractor bolts to secure in place.
PIVOT SUPPORT:
Turn the front wheels towards the right.
Install the pivot support (item 1) between the two
supports and slide
in place the pin (item 2) in the
required holes. The other holes get the hooked end
(item 5) of the pin. See table.
Install the pivot support.
Tires
Holes in pivot support
15’’ x 6’’ or smaller
Top
16’’ x 6.5’’ or bigger
Bottom
LIFT ARM:
Insert the nylon bushings (item 1) in the lift arm (item
2).
Install the handgrip (item 3) on the lift arm as shown.
