9
ASSEMBLY
Install the left support and handle support
LEFT SUPPORT AND HANDLE SUPPORT:
Install the left support (item 1) and the handle support
(item 17). Secure the brace pin (item 19)
The chart identifies the hardware according to the
holes in the tractor’s frame. Even though some holes
may not exist on certain models of tractors,
use the
maximum of holes & bolts possible to ensure the
solidity of the kit.
Carr. B. = Carriage bolt; head towards the inside.
Hex B. = Hexagonal bolt; head towards the outside,
except 14 & 16.
N/A = Not applicable.
NOTE
:
1. On new tractors, turning the wheels to the right
will facilitate installation .
2. The spacer (item 15) is used to strengthen
certain heat shields.
2
Carr. B. 3/8 x 3/4’’
Flange nut 3/8’’
Thread cutting
screw 3/8 x 1’’
3
Hex. B. 3/8 x 1’’
Thread cutting
screw 3/8 x 1’’
4 N/A
Thread
cutting
screw 3/8 x 1’’
5
Carr. B. 5/16 x 1’’
Flange nut 5/16’’
N/A
6 N/A
Thread cutting
screw 5/16 x 1’’
7, 9
Hex. bolt 3/8 x 1’’
Flange nut 3/8’’
N/A
10, 11
Hex. B 3/8 x 1’’
Flange nut 3/8’’
(
round holes
)
N/A
12
Set screw 5/16 x 1/2’’
(on support for the cab)
N/A
Item #
If square holes
on tractor
If threaded
holes on tractor
14, 16
Hex. B 3/8 x 1’’
Flange nut 3/8’’
(round holes)
N/A
18 Plastic
grommet
(round hole in support)
N/A
13
Tractor bolt and Spacer
(round holes)
N/A
8
Hex. bolt 3/8 x 1’’
Flange nut 3/8’’
Thread cutting
screw 3/8 x 1’’
