15
Tractor Position
2006 (most models, factory installed)
A
VGT frame
B
Others C
2007 (most models tractors)
D
Place the support (item 1) in the required position
according to chart, secure with the bolts (item 3 ) and
tighten firmly.
NOTE:
For position D, use the shim (item 4) and two
1/4 x 3/4" hex bolts supplied in the hardware bag.
Remove the flat pulley (item 5). Turn upside down
and reposition the pulley as shown in A with the flat
washers.
Reinstall the spring (item 2) in its original place.
Remove and reinstall the spring
ASSEMBLY
Use the following instructions to reposition the
support (item 1) as needed.
To make the job easier, remove the spring (item 2).
Remove the support (item 1) by removing the two
hex. bolts 1/4’’ x 1/2’’ (item 3).
Reposition the support
Reposition the pulley
