19
ASSEMBLY
STEP 5
SNOWBLOWER PREPARATION:
Install the rotation ring (item 2) over opening (item 3)
as shown and align the notches.
Place the chute (item 1) (facing the rear) and clip the
back over the rotation ring then turn the chute
towards the front to lock into place.
Place a 7/16" flat washer (item 2) on the rotation
worm shaft (item 1).
Install the rotation worm in the rotation support (item
3).
Secure with a 7/16" dia. flat washer (item 4) and a 2.5
mm. hair pin (item 5).
Install chute
Install rotation worm
