14
ASSEMBLY
NOTE
: If a bracket is installed on the outside of the
lefthand side of the tractor frame:
1 Install the left support on the inside of the frame.
Secure both bracket and left support to frame using
hardware already mentionned.
2 Insert two flat washers 7/16’’ between the right
support and the frame,
but only in this case.
SUPPORTS-VGT FRAME INSTALLATION:
To install the drive mechanism, you must remove the
two bolts from the footrests (from each side).
Secure the left support (item 2) (longest support with
point towards the front) and the right support (item 1)
(shortest support with point towards the front) with the
bolts removed from the footrests.
Install supports (VGT frame)
NOTE:
1) This drive mechanism may be mounted on tractors
with two types of clutch mechanisms. See the
following instructions on the next pages for those
that are appropriate for your tractor.
2) The mower deck must be removed to install / use
the drive mechanism.
NOTE: The drive mechanism must be straight, to
make sure the belt works well.