7
ASSEMBLY
Install brace pin
STEP 2
SUBFRAME INSTALLATION:
For other tractors:
Use brace pin (item 4) and follow the
installation instructions below.
Install the brace pin (item 4) on the right support (item
2) with two carriage bolts 3/8’’ x 1’’ (item 3;heads
outside) and two 3/8" flange nuts.
Tighten firmly.
NOTE:
Generally, the brace pin must be over the
lawnmower belt and at the same time, as low as
possible.
No interference is allowed.
See chart.
Tractor Hole
(inside view of item 2)
Position of
brace pin
2006 and
2007
(most)
Bottom Upwards
VGT
frame
Bottom Downwards
Others Top
Upwards
or
downwards
You must choose which brace pin (item 1 or item 4)
that is appropriate for your tractor model.
Tractors with a clutch that measures 5.5”
high only (as shown):
You must use brace pin (item 1) and install it in the
bottom holes of the right support (item 2) with two
carriage bolts 3/8’’ x 1’’ (item 3;heads outside) and
two 3/8" flange nuts.
Tighten firmly.
NOTE:
This brace pin must be under the lawnmower
belt.
The belt must not touch the brace pin.
