8
The SL-C510 with AIS models are equipped with a very low power consumption OLED display,
providing a quick and easy lantern status and diagnostic checks by maintenance staff.
To activate the OLED display simply touch the indicated location. Once activated, the OLED will display
in sequence the following information:
• Product Version
• Product Model
• Lantern Operational Mode
• Lantern Flash Character
• Lantern Intensity
• Battery Voltage
• Lantern Status
• Lantern Hibernation Status and settings
• Lantern last accessed date
The OLED system will continue to display the lantern settings/status in a sequential manner unless
the Touch Pad is activated for a second time, this action will allow the OLED display to stop on the
information showing at the Touch Action. To visualise the remaining information simply “Tap” the Pad
again then the system will display the next set of information.
When the Touch Pad device is inactive for more than three minutes the OLED display will enter in
sleep mode and can only display the lantern settings/status if the Pad device is activated again.
NOTE – The OLED display and Touch Pad components are designed to provide lantern settings/status
readings only, the lantern programming can be achieved by one of the Sealite lantern programming
methods, the information is available in this product manual.
Viewing Lantern Settings
