64
7. Click on the Message schedule tab and input values highlighted. These values will come
from the data collected at the beginning of this procedure.
Note: If Message 6 is required, then click on the
button and new Message schedule will
appear and then follow the next step.
8. Click on menu button ‘Status Inputs’ and tick all the boxes as shown in Figure 5.
9. Select from ‘AtoN’ drop down menu ‘Send all configuration’ as shown in Figure 6.
10. If the AIS AtoN is a Type 1 unit then go to the next step titled “AIS type 1 Message Setup” If
the AIS AtoN is a Type 3 unit then go to the next step titled “AIS type 3 Message Setup”.
Figure 4
Figure 5
Figure 6
