SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at
www.sealite.com
33
Read Hibernation
By pressing the following key sequence the lantern will respond with status of Hibernation Mode.
Where:
• A single long flash = Hibernation Mode is Enabled
• Two quick flashes = Hibernation Mode is Disabled.
T/C
T/C
R
L
I
T/C
T/C
R
L
I
T/C
T/C
R
L
I
0
1
2
User Case Example: Configuring the lantern for Hibernation
In this example, we want the lantern to hibernate each year from Dec 10th, through to February 15th,
and the lantern is located inside a storage warehouse.
The required key sequence is:
Command
IR Controller Key Press
Store the Hibernation
Date Range
Enable Hibernation
L
I
2
T/C
T/C
8
6
6
T/C
T/C
1
1
2 0 7
3
T/C
T/C
L
I
1
2
0
T/C
T/C
1
1
5
0
2
L
I
1
T/C
T/C
L
I
T/C
T/C
L
I
2
T/C
T/C
8
6
6
T/C
T/C
1
1
2 0 7
3
T/C
T/C
L
I
1
2
0
T/C
T/C
1
1
5
0
2
L
I
1
T/C
T/C
L
I
T/C
T/C
Storage Mode (Advanced users)
For situations where the lantern is put into storage but with access to daylight, the IR Remote Control
can be used to configure the lantern into Storage Mode.
This mode manually forces the lantern to turn off, but with access to daylight it will still charge battery
pack. However the lantern will not keep track of the date.
In Storage Mode, the GPS is disabled however the lantern will still respond to IR commands.
The lantern will automatically enter Storage Mode, if it is hibernating and it has not detected any light
for 20 hours.
Enter Storage Mode
By pressing the following key sequence the lantern will enter Storage Mode:
The lantern will leave storage mode when exposed to daylight or if the power switch is turned OFF
and ON again.
1
T/C
T/C
L
B
3
T/C
T/C
L
B
Read Stored Hibernation Dates
By pressing the following key sequence the lantern will respond with the stored start and end dates for
Hibernation:
T/C
T/C
R
L
I
T/C
T/C
R
L
I
T/C
T/C
R
L
I
0
1
2
