6
The following components come as standard with each lantern:
• SL-LA510 lantern
• SL-S2A2 510 Chassis
• Quick Start Guide
• USB Programming Cable
• USB Memory Stick
Optional
• IR programmer remote
These components are securely packaged within protective wrap in a carton and shipped to you.
Please check that ALL of these components are included with your order and contact your
Sealite representative as soon as possible if anything is missing.
Product Components
Installation
Your SL-C510 with AIS is supplied with an internal ON/OFF switch. In the OFF position (as supplied),
power is removed from both the AIS module and the lantern. The internal solar charging circuitry will
continue to operate normally.
Charging the Battery
New lanterns should be left in the sun with the internal switch in the OFF position for 1-2 days to
ensure battery is charged. Alternatively, the external charge port can be used to charge the battery
(charger sold separately). Ensure battery voltage is >13V before placing into service.
Preferred Installation Location
For best lantern performance, ensure solar modules are not covered or in the shade and are in clear
view of the sky will result in optimum charging results. A clear GPS signal strength is required.
For location suitability use the Sealite Online Solar Calculator and ensure
‘extra charge’ all year round.
Note: The SL-C510-AIS must be grounded via the grounding post at
the base of the chassis. Failure to do so will void your warranty.
The AIS should be programmed whilst the unit is in the OFF position.
Please refer to the AIS section of this manual for programming.
Lantern Installations Settings
The lantern can be programmed via 2 methods,
1. Bluetooth connectivity via the SealitePro
®
App (recommended);
2. Via the optional Sealite IR Controller (optional);
The SealitePro
®
and Sealite IR Controller Instructions are included
in this manual.
On/Off Switch
