manualshive.com logo in svg

Sealite SL-C510-AIS, Installation & Service Manual

Share
Download
Sealite SL-C510-AIS Installation & Service Manual Download Page 21

SL-C510-AIS

Compact 5-9NM Solar Marine Lantern

Latest products and information available at 

www.sealite.com

21

NOTE – If an intensity level is selected that is beyond the specification of the lantern, the entered figure 

will be displayed in red, with the lantern automatically configuring to the maximum possible of 100%.
In addition, once the intensity is selected the winter autonomy will be recalculated.

Sync Offset

This panel is used to set a Flash Code delay. The built-in GPS receiver and advanced software of the 

Sealite synchronised lanterns allow for the adoption of Sync Offset channel marking – a unique system 

that cascades the flash synchronisation of channel lanterns in a uni or bi-directional flash pattern. By 

default, this figure is set to zero.

Press Sync Offset type a value in seconds and then press “Set / Apply” to confirm the change.

Summary of Contents for SL-C510-AIS

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands