manualshive.com logo in svg

Sealite SL-C510-AIS, Installation & Service Manual

Share
Download
Sealite SL-C510-AIS Installation & Service Manual Download Page 15

SL-C510-AIS

Compact 5-9NM Solar Marine Lantern

Latest products and information available at 

www.sealite.com

15

Solar Calculations

This function estimates the lantern autonomy based on the lanterns current settings and geolocation.

•   Solar Calculator Options

  The SL-C510 with AIS has options to be fitted with SATCOM and GSM 

modules to allow multiple lanterns synchronisation and monitoring. 

The SealitePro

®

 App offers the user the option to modify the GPS 

and GSM by enabling or disabling the operation. In addition, it 

offers different levels of transmissivity conditions for accurate solar 
calculations.

•   Solar Charge

    This function estimates whether the collected solar charge is sufficient 

to replenish battery consumption and will indicate if the unit is viable for 

the selected location.

•   Autonomy

    This function estimates the lantern autonomy based on the lantern 

settings and geolocation.

•   Option 1

 

 

    Use the current GPS location to establish the lantern autonomy.

Summary of Contents for SL-C510-AIS

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands