manualshive.com logo in svg

Sealite SL-C510-AIS, Installation & Service Manual

Share
Download
Sealite SL-C510-AIS Installation & Service Manual Download Page 42

42

Description of the proAtoN Programming Software Tool

Installing the proAtoN PC Software Tool

The proAtoN PC application is available from the USB memory stick supplied with the lantern. The 

application provides features for configuration of the transceiver and advises correct operation before 

deployment. 

The main features of the application are:
• 

Configuration of essential transceiver parameters such as MMSI, name and dimensions

• 

Configuration of reporting schedules

• 

Configuration of virtual and/or synthetic AtoN reporting schedules

• 

Configuration of other messaging features

• 

GNSS diagnostics

• 

System diagnostics and alarm display

• 

Configuration of the source for external equipment status information

The SL-C510 with AIS AtoN supports VDL configuration and chaining. For further information please 

contact Sealite for support.

The proAtoN should be installed from the CD supplied (or USB stick) with the transceiver. The steps to 

complete the installation are as follows:

1.  Insert the CD into your PC
2.  Navigate to the proAtoN folder on the CD
3.  Double click the ‘setup.exe’ item to start the installation process
4.  Follow on screen instructions to complete the installation

Following successful installation, the application can be launched from the proAtoN folder in the 

Windows start menu.

USB device drivers for the transceiver are installed automatically during installation of proAtoN.
Note: The transceiver model is powered from the USB Port while connected to the computer.

CAUTION

Ensure the ON/OFF switch is in the OFF position when configuring 

the AIS Module. The VHF transmission may damage your 

computer as a result.

Summary of Contents for SL-C510-AIS

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands