manualshive.com logo in svg

Sealite SL-C510-AIS, Installation & Service Manual

Share
Download
Sealite SL-C510-AIS Installation & Service Manual Download Page 5

SL-C510-AIS

Compact 5-9NM Solar Marine Lantern

Latest products and information available at 

www.sealite.com

5

SL-C510 With AIS

Compact 5-9NM Solar Marine Lantern

The SL-C510 with AIS is a robust, completely self-contained 5-9NM Solar LED Lantern specifically 

designed to withstand the tough marine environment to provide years of reliable, low maintenance 

service. The 3 & 4 hole bolt pattern base fits directly onto existing 200mm bolt pattern industry 

standard mounts for ease of installation.
The four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect 

sunlight at all angles. The SL-C510 with AIS has a large power supply consisting of four 8.4-watt panels 

(33.6 watt total) making this model perfect for use in lower sunlight areas or where more demanding 

duty cycles are required.
The base and top of the lanterns are made from composite moulded polymer with UV-stabilised 

rubber corners and gaskets providing a superior IP68 – the best in the industry. A handle is 

incorporated into the chassis for safe lifting.
The tough, polycarbonate lens is specifically designed for use with LEDs and incorporates an 

environment-friendly spike to deter unwelcome bird life. The lens design also ensures that vessel 

operators clearly see the light from above when passing the AtoN. The design incorporates 

a conveniently located OLED (Organic Light-Emitting Diode) screen with touchpad allowing 

maintenance personnel to check the diagnostics of the lantern with the touch of a button.
Completely programmable via the new Bluetooth

®

 connected SealitePro

®

 mobile application, the 

SL-C510 with AIS can be configured and monitored from a distance up to 50 metres. An in-built 

solar calculator confirms the lanterns ability to operate at the set location, ensuring optimal operating 

performance. 
The SL-C510 with AIS is available with GPS Synchronisation as standard. Two (2) or more lights can be 

synchronised to flash in unison via an internal GPS module.
The SL-C510 with AIS is backed by Sealite’s industry leading 3-year warranty.

OLED Display for Lantern 

Status check

LED Optic

Robust composite 

moulded base and top 

with handle, Aluminium 

chassis with rubber 

extruded corners

3 & 4 hole 200mm bolt pattern 

base for ease of installation

Internal 24Ah Battery

4 x monocrystalline solar modules, 
ensuring maximum light collection 
to charge the battery

Summary of Contents for SL-C510-AIS

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands