manualshive.com logo in svg

Sealite SL-C510-AIS, Installation & Service Manual

Share
Download
Sealite SL-C510-AIS Installation & Service Manual Download Page 24

24

Let’s try a practical example

Quick Access Tab

If Bluetooth connection is established, data about the lantern battery charge and load current will 

appear on the “Power Monitoring” tab. From this drop-down tab the user will be able to verify the 

amount of battery charge that the lantern was able to capture in the previous 24 hours. In addition, the 

information of load current through the system can be monitored.

The SealitePro

®

 App also allows a quick access tab 

offering the user access to the main setting functions 

of the lantern, applicable to Android devices only.
By touching the menu button, a drop down menu will 

pop showing the setting functions available.
In addition, the quick access tab offers other 

additional functions:

• Disconnect:

  By touching “Disconnect” it will automatically 

disconnect the control device from the lantern.

• Email Lantern Data:

  This function allows to send the lantern 

configuration and status via email.

• Email Lantern Data:

  This function allows to send the lantern 

configuration and status via email.

Summary of Contents for SL-C510-AIS

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands