| P
age 51
|
SEABOB
Operation
Manual
|
5
5.8 Diving to a depth of more than 2.5 m
Be sure to read the safety information and
instructions relating to operation on the wa-
ter surface and diving to a depth of up to 2.5 m.
In addition, observe the following safety informa-
tion:
• Only divers with a valid diving licence or accompa-
nied by a certified diving instructor are allowed to use
the SEABOB for diving to a depth of more than 2.5 m.
• Only use the SEABOB for diving if you are completely
healthy. Consult a doctor if you are in doubt.
• Use only complete and fully functional diving equip-
ment, in particular diving goggles, when diving.
• Never dive alone. Especially when scuba diving in
caves, make sure that you are accompanied by an-
other person with a second craft.
• Before diving, always check to make sure that the
depth sensor is working properly.
• Always adhere to the recommended descent and as-
cent rates for scuba diving, while observing the de-
compression times.
• Always keep an eye on the remaining operating time
and include reserves in your calculations. Always en-
sure that you are able to resurface and return to the
starting point by yourself without the assistance of
the SEABOB.
• When scuba diving, never rely completely on the
depth sensor reading. The depth sensor is provided
for information purposes only. The depth sensor is not
a calibrated gauge and should not be used to perform
tasks such as calculating decompression times.
5.8.1 Setting the maximum diving depth
The diving depth limit for all SEABOB models is factory
set to 2.5 m (depth limit with safety cut-off). If you want
to dive to greater depths, you can increase the diving
depth incrementally up to the maximum diving depth.
The maximum possible diving depth is 40 m.
Only divers with an appropriate diving licence are
allowed to increase the maximum diving depth of
2.5 m with the purpose of diving to a greater program-
mable depth.
To set the maximum diving depth, proceed as fol-
lows:
1. Switch on the SEABOB (the device should be ready
for operation). The operation display appears in the
display.
2. Tap the button combination silver*– blue – red in
quick sequence.
3. Enter your Owner-PIN (see Chapter 5.4.12 "Entering
PIN").
4. Switch between the settings with the blue or silver*
button until the maximum diving depth is displayed.
5. To increase the maximum diving depth, tap the green
button (repeatedly).
6. To decrease the maximum diving depth, tap the red
button (repeatedly).
7. Pull the Powergrip against the Controlgrip to confirm
the new setting and return to the operation display.
For safety reasons, the factory-set depth limit
of 2.5 m can only be changed by first entering
your Owner-PIN. This is done to prevent the setting of
the maximum diving depth from being changed by unau-
thorised persons. After you have finished scuba diving to
a depth of more than 2.5 m, reset the maximum diving
depth immediately to the default safety setting of 2.5 m
to prevent the risk of injury to others.
For safety reasons, the depth limit is automatically reset
to the default setting of 2.5 m each time the SEABOB is
switched on.
* or black
Summary of Contents for CAYAGO F7
