SEABOB CAYAGO F7, Operation Manual, Page: 34 / 82

| P
age 34
|
SEABOB
Operation
Manual
|
5
of the SEABOB has been inserted into the sealing
frame of the accumulator box. When there is about
one centimetre left to go, press the accumulator box
and the SEABOB firmly together to overcome the light
pressure that has built up within the seal system. If
you have difficulty pushing the components together,
spray the clean sealing ring and frame with the spe-
cial lubricant specified above.
When connecting the accumulator box and
SEABOB housing, make sure that no blades of
grass, dirt, dust or sand can get caught between the
seals, thereby reducing the effectiveness of the seal.
5. Insert the quick clamps of the accumulator box into
the locking hooks on the SEABOB housing.
Quick clamp Locking hook Grip
2 1
4 3
6. Turn the grips of the quick clamps clockwise until
tight.
7. Fold the grips of the quick clamps down toward the
bow of the craft so that the grips lie flat against the
housing.
Caution! Beware of sharp edges on the locking
clamps. For technical reasons, sharp edges cre-
ated during manufacture may be present on the locking
clamps. Sharp edges may cause minor injuries to fingers,
fingernails and other body parts, especially if you are not
used to using the locking clamps.
8. Double-check the sealing cap on the charging socket
to ensure that it is seated properly.
9. The SEABOB is now ready for operation once the ac-
cumulator box has been fully charged.