manualshive.com logo in svg

SEABOB CAYAGO F7, Operation Manual, Page: 43 / 82

Share
Download
SEABOB CAYAGO F7 Operation Manual Download Page 43

|  P

age 43 

| 

SEABOB

Operation

Manual 

|

5

5.4.11 Displaying serial numbers

1.  The SEABOB is in Sleep mode. The display is switched 

off. 

2.  Tap the blue button.
3.  The display is switched on, and the SEABOB logo ap-

pears.

4.  Pull  the  Powergrip  against  the  Controlgrip  (within  

3 seconds), and hold it there continously.

5.  The software version number under the SEABOB logo 

disappears after 1 second.

6.  Hold the Powergrip in pulled position. Tap the green 

button. The serial number of the SEABOB is displayed 
(the first letter is an "S").

7.  Hold  the  Powergrip  in  pulled  position. Tap  the  red 

button. The serial number of the accumulator box is 
displayed (the first letter is an "A").

5.4.12 Entering PIN (Owner-PIN / User-
PIN)

Owner-PIN: 

This PIN (Personal Identification Number) of the owner is 
used to change the settings in the menu or to switch on 
the device (if PIN prompt has been activated).

User-PIN: 

This PIN (Personal Identification Number) of the user is 
used  to  switch  on  the  device  (if  PIN  prompt  has  been 
activated).

Note:

 Please find your Owner-PIN on the supplied cer-

tificate.

The PIN prompt when switching on the device is deac-
tivated at the factory. This means that you will be able 
to switch the SEABOB on without entering a PIN. If you 
want to activate the PIN prompt when switching on the 
device, or if you want to activate and change the User-
PIN, you will need the optional software available on CD 
(see Chapter 11 "Accessories").

If the PIN prompt has been activated (PIN 

�

 "0000"), the 

user will be required to enter the PIN when switching on 
the device. To switch on the SEABOB, you can use either 
the Owner-PIN or the User-PIN. Since you are the SEA-
BOB owner, you can use either PIN, so that you only have 
to remember one number. The owner of the craft provides 
the user only with the User-PIN for switching on the SEA-
BOB. The Owner-PIN is the only PIN that can be used for 
safety settings, in particular the maximum diving depth, 
maximum power and operating time limit (Timer). 

Entering PIN

SEABOB serial number

Accumulator box serial number

Summary of Contents for CAYAGO F7



















































































Reviews:

No comments