| P
age 15
|
SEABOB
Operation
Manual
|
1
1.4 Safety information for diving to a depth of more than 2.5 m
In addition to the safety information provided above, be sure to observe the following information when
diving to a depth of more than 2.5 m:
• Only divers with a valid diving licence or accompanied by a certified diving in-
structor are allowed to use SEABOB for diving to a depth of more than 2.5 m.
• Only use the SEABOB for diving if you are completely healthy. Consult a doctor if
you are in doubt.
• Never dive alone. Especially when scuba diving in caves, make sure that you are
accompanied by another person with a second craft.
• Use only complete and fully functional diving equipment when diving. Ensure
that no air apparatus components or hoses are hanging free in the water where
they might get into the jet channel.
• Only dive when the visibility under water is good. Never dive without diving gog-
gles. Only with diving goggles will you be able to detect underwater hazards in
time.
• Before diving, always check to make sure that the depth sensor is working prop-
erly. If the depth sensor is damaged or the water inlets are dirty, the motor’s
safety cut-off will not function at the set maximum diving depth (default setting
2.5 m). The depth sensor reading in the display should be approx. "0.0 m" when
the craft is on the water surface. You can double-check the reading by briefly
submerging the SEABOB without activating the motor.
• The motor cuts off automatically if the set maximum diving depth (depth limit)
is exceeded and can only be switched back on when the craft has returned to a
diving depth that is above the depth limit.
• For safety reasons, the factory-set depth limit of 2.5 m can only be changed by
first entering your Owner-PIN. This is done to prevent the setting of the maxi-
mum diving depth from being changed by unauthorised persons. After you have
finished scuba diving to a depth of more than 2.5 m, reset the maximum diving
depth immediately to the default safety setting of 2.5 m to prevent the risk of
injury to others.
• For safety reasons, the depth limit is automatically reset to the default setting of
2.5 m each time the SEABOB is switched on.
• Keep in mind that the SEABOB switches off automatically (Sleep mode) if inac-
tive for an extended period of more than 10 minutes (Time-off). After switching
the SEABOB back on, you will need to re-enter your Owner-PIN if you want to
start the motor at a diving depth of more than approx. 2.5 m. After entering your
Owner-PIN, you can increase the depth limit again so that the set maximum div-
ing depth is greater than the one currently shown. The diving depth display and
the warning symbol will start flashing as soon as you exceed the depth limit.
Summary of Contents for CAYAGO F7
