| P
age 28
|
SEABOB
Operation
Manual
|
5
5. Operation
5.1 Start-up
Before using the SEABOB for the first time,
read through this Operation Manual careful-
ly, including the safety information and the instruc-
tions on proper use.
Only use the SEABOB as intended (see Chapter 2
"Proper use").
Take the SEABOB, the separate accumulator box ACS, if
ordered and the charger out of the packaging, and place
them on a dry and sturdy surface that will not damage
the components.
Do not throw away the packaging. It can be used later
(for example, when sending the device in for service).
The accumulator box is delivered in a partially
charged state. To avoid total discharge of the ac-
cumulator box, you should charge the accumulator box
immediately after delivery (within 1 week) to at least
the charge state "air transport / storage". Use only the
charger supplied by the SEABOB manufacturer or the op-
tionally available quick charger to charge the accumula-
tor box.
Charge the accumulator box after each use (within
24 hours) and during longer periods of storage
continuously (trickle-charge) to at least the charge state
"air transport / storage" to avoid irreparable total dis-
charge of the valuable High-Energy Li-Ion accumulator
cells. Be sure to read the information provided in this Op-
eration Manual on charging the accumulator box.
5.2 Charging the accumulator box
Never expose the SEABOB, accumulator box
and charger to high temperatures (max. 60 °C /
140 °F) caused e.g. by open fire, direct sunlight or by stor-
age inside a closed motor vehicle or boot. If exposed to
heat, flaming gases can be discharged through the ac-
cumulator cells‘ safety valve causing serious injury. In ad-
dition, the LCD display will turn black if exposed to heat
and may become irreparably damaged.
Protect the charger, in particular the charging
plug with sealing cap and mains plug as well as
the charging socket of the accumulator box from dam-
age, dirt, dust, moisture and heat. Beware! Danger of
electric shock!
Note:
The accumulator box ACS (Accumulator Change
System) can be charged separately or after it has al-
ready been attached to the SEABOB. The LED display on
the charger shows the activity of the charger. The exact
charge state is shown on the SEABOB display. For infor-
mation on how to install the accumulator box ACS see
Chapter 5.3 "Installing the accumulator box ACS".
Charge only in dry, cool and well ventilated loca-
tions. Never use the charger if any cables or plugs
are damaged. Doing so can cause electric shock, result-
ing in severe injury or death.
Only use chargers supplied by the SEABOB manu-
facturer to charge the accumulator box.
During the charging process, do not place any objects on
the accumulator box or charger to ensure that heat pro-
duced during charging is dissipated properly (convection
cooling). Ensure that air can circulate freely, and position
the optionally available quick charger so that it is upright
for optimum cooling. Should the charger (or quick charg-
er) overheat, it automatically reduces the output current
to prevent thermal overload. If this happens, the charg-
ing process is prolonged accordingly. If the accumulator
box is hot, let it cool down before charging.
Summary of Contents for CAYAGO F7
