![background image](http://html1.mh-extra.com/html/ovington-boats/musto-skiff/musto-skiff_rigging-manual_1663486001.webp)
Musto Skiff – Rigging Guide (v0.5) -Jan 2019
1 of 19
Musto Skiff Rigging Guide
This rigging guide is to be used in conjunction with the Class Rules and CE Owners Manual, both available at
http://www.mustoskiff.com
Please take your time to rig your boat up prior to your first sail. You will, no doubt, be in a hurry to get out on the water and
enjoy some serious skiff sailing but a few extra minutes spent checking your boat is correctly rigged will make sure you have
an enjoyable sail and may prevent you damaging your kit.
You can rig the boat in a different order from than that described here but we know this method works.
NOTE: The following rigging fittings that are designed to be adjustable may be adjusted when not racing using only the fitting
functionality – (i) the angle and length of the mast spreaders, (ii) inboard, outboard and forestay shroud adjusters, and (iii) the
batten tensioners.”
Below; shows the starting point, you should have one of everything in this picture.
1. The boat comes supplied with everything (except the
forestay tensioning device) you need to go sailing, if you are
missing an item please call your dealer
2. You have to start somewhere so lets start by attaching the
Harken Carbo Ratchamatics for the spinnaker sheets. One
each side. They are not handed so you don’t need to worry
about which way round they go.