SCW The Econ D1 User Manual Download Page 75

Page: 75 / 180

Choose a record file you want to play back.

If there is only one channel in the search result, clicking

button takes you to Full-screen Playback

interface of this channel.

If more than one channel is optional, clicking

button takes you to step 3 and step 4.

Figure 6.11 Result of Normal Video Search

Choose channels for simultaneous playback.

Note:

Optional channels for simultaneous playback are the same as the channels chosen to search

record files in step 1. And the channel with the recorded file selected in step 2 is the main channel

during multi-channel playback and it is displayed at the upper left corner.

Figure 6.12 Select Channels for Synchronous Playback

Synchronous Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Summary of Contents for The Econ D1





















































































































































































Search results

Summary of Contents for The Econ D1

Reviews:

Related manuals for The Econ D1

Brands by name

Popular brands

SCW The Econ D1, User Manual

Search results

Summary of Contents for The Econ D1

Reviews:

Related manuals for The Econ D1

Brands by name

Popular brands