SCW The Econ D1, User Manual

Page: 119 / 180

9.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate device over network.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the
General
tab.
Figure 9.1 General Network Sett LQJVRI6WDQGDUG 6WDQGDUG3URPRGHOV
Figure 9.2 General Network Settings of 6WDQGDUG3UR;/PRGHOV
3.
In the
General Settings
interface:
You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS
Server.
If the DHCP server is available, you can click the checkbox of
DHCP
to automatically obtain an IP
address and other network settings from that server.
Note:
The valid value range of MTU is 500 ~ 1500.
4.
After having configured the general settings, click the
Apply
button to save the settings.
118