SCW The Econ D1, User Manual

Page: 62 / 180

5.7 Configuring Redundant Record
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability.
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to
Chapter 10.4 Managing HDD Group
. There
should be at least another HDD (NetHDD) which is in R/W mode.
Steps:
1.
Enter HDD Information interface.
Menu> HDD
Figure 5.30 HDD General
2.
Select the
HDD
and click to enter the Local HDD Settings interface.
1) Set the HDD property to Redundant.
Figure 5.31 HDD General-Editing
2) Click
Apply
to save the settings.
3) Click
OK
to back to the upper level menu.
3.
Enter the Record setting interface.
Menu> Record> Encoding
1)
Select
Record.
61