Scout Boats 420 LXF, Owner'S Manual

Page: 80 / 202

80
Electrical System
Tank Levels
• View tank level information for water and
waste tanks.
• View gas and diesel fuel tank level information.
Data
• Displays network information.
• Displays temperature and pressure values.
• Monitors all circuits connected to the CZone
network.
Alarms
• CZone network status reporting.
• Indicates alarms for onboard faults in audible
and visual form (bilge pump operation, high
bilge water level, smoke alarm).
• Indicates alarms for onboard AC electrical
faults in audible and visual form (reverse
polarity, ground faults, overloads, low/high
voltage or improper frequency).
CZone DC Electrical System Control
Output Module Circuit Protection
Accessory circuits activated by the digital switches
are protected by spade type fuses located in the
CZone output modules. The circuits controlled by
each module are numbered and labeled for the
accessory activated and protected by the module.
The fuses are color coded to indicate the amperage
of the fuse. The amperage rating is also clearly
printed on the fuse housing. Never replace a
blown fuse with a fuse of a higher amperage and/
or a different color.
The fuses are located behind a removable panel
on the lower front face of each module. Refer to
the CZone operation manual for instructions to
remove the panel and replace the fuses.
In addition to circuit protection, the fuses and
fuse panels are equipped with a manual circuit
bypass feature that allows any circuit controlled by
a CZone output module to be activated manually.
To bypass the controller and activate a circuit
manually, remove the protective cover and find
the fuse for the circuit to be bypassed. Remove
the fuse and reinsert it in the bypass position.
Refer to the Scout CZone operation manual for
additional information on the features and opera-
tion of the CZone control system.
CZone Circuit 3 Fuse In Bypass Position
CZone Output Module Fuses
CZone Control Output Module
https://www.boat-manuals.com/