Scout Boats 420 LXF Owner'S Manual Download

Page: 90 / 202

Electrical System

Stove

Supplies 120 volt AC electrical current to the stove

in the galley.

Cabin Refrigerator

Supplies 120 volt electrical current directly to the

galley refrigerator when AC power is available and

chosen over the 12 volt power supply. See the

refrigerator manual for more information.

Cockpit AC Outlet

Supplies 120 volt AC electrical current to the

ground fault interrupter (GFI) electrical outlet in

the electrical systems room companionway.

BBQ Grill (Optional)

Supplies electrical current to the optional BBQ grill

when this option is installed.

Cockpit Refrigerator (Optional)

Supplies 120 volt electrical current directly to

the optional cockpit refrigerator when AC power

is available and chosen over the 12 volt power

supply. See the refrigerator manual for more

information.

Fishbox Freezer (Optional)

Supplies electrical current to the freezer com-

pressor for the optional transom fishbox/freezer

control in the cockpit when this option is installed.

Ice Maker (Optional)

Supplies 120 volt electrical current directly to the

optional cockpit ice maker. Always make sure the

freshwater system is activated to supply water to

the ice maker. Refer to the ice maker manual for

more information.

Sea Keeper

Supplies electrical current to the optional Sea

Keeper stabilizing system mounted to the stringers

in the electrical systems room when this option

is installed. Refer to the Sea Keeper operation

manual for more information.

Acc

Reserved for additional 120 volt AC equipment.

6.11 Generator

The generator is supplied 12 volt power for the ig-

nition and starter motor by the house battery and

is located in the aft systems room. The generator

oil and coolant should be checked whenever you

check the oil in the main engines.

CZone Generator START/STOP Button

The generator START/STOP button in the cabin

breaker panel and the control feature in the CZone

display control the starting, running, and stopping

of the generator. Digital gauges in the panel moni-

tor engine temperature, exhaust temperature, oil

pressure and other generator functions.

The generator can also be operated from a control

panel on the generator. The circuit breakers and

fuses that protect the generator AC and DC circuits

are also on this panel or on the side of the panel

control box. An owner operator’s manual for the

generator has been supplied with this manual.

Please refer to it for details on generator operation

and circuit protection.

The generator engine uses a closed cooling system

with a seawater-cooled heat exchanger. A sacrifi

cial anode in the seawater cooling system protects

generator components that are in contact with sea-

Generator Onboard Control Panel

https://www.boat-manuals.com/

Summary of Contents for 420 LXF











































































































































































































Search results

Summary of Contents for 420 LXF

Reviews:

Related manuals for 420 LXF

Brands by name

Popular brands

Scout Boats 420 LXF, Owner'S Manual

Search results

Summary of Contents for 420 LXF

Reviews:

Related manuals for 420 LXF

Brands by name

Popular brands