Scout Boats 420 LXF, Owner'S Manual

Page: 82 / 202

82
Electrical System
Refer to the Scout CZone operation manual for
additional instructions for operating the generator.
DC Panel “Push TO Reset” Breakers
The “push to reset” circuit breakers are located
on the starboard side of the DC panel. Some are
activated by the House battery switch and some
provide continuous power to the circuits they
protect and remain activated when the battery
switches are OFF. These breakers are always ON
unless tripped by an overload.
The following circuits are supplied power
and protected by the “push to reset” circuit
breakers:
NEAMA CZone
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt elec-
trical power to the CZone system and network.
This breaker is always supplied current when the
house battery is connected.
NEAMA Garmin
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt elec-
trical power to the Garmin electronics network.
This breaker is always supplied current when the
house battery is connected.
WIFI
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt electri-
cal power to the wireless network. This breaker is
always supplied current when the house battery
is connected.
Reading Lights
Protects the circuit that supplies 12 volt electrical
current to the reading lights above the berth in
the cabin. This breaker is supplied current when
the House battery switch is activated.
Stereo
Protects the circuit that supplies 12 volt electrical
current to the stereo mounted in the cabin DC
panel. This breaker is supplied current when the
House battery switch is activated.
DVD Player
Protects the circuit that supplies 12 volt electrical
current to the DVD player mounted in the cabin
DC panel. This breaker is supplied current when
the House battery switch is activated.
Head
Protects the circuit that supplies 12 volt electrical
current to the toilet control switches for the electric
head system. This breaker is supplied current
when the House battery switch is activated.
Console Table
Protects the circuit that supplies 12 volt electrical
current to the switches that raise and lower the
cabin table to convert the dinette to a berth. This
breaker is supplied current when the House bat-
tery switch is activated.
Bow Table
Protects the circuit that supplies 12 volt electrical
current to the switches that raise and lower the
table at the bow cockpit seating area. This breaker
is supplied current when the House battery switch
is activated.
Wiper Park
Protects the circuit that supplies 12 volt electri-
cal current to the circuit that parks the windshield
wiper to the side of the windshield each time the
wiper switch is turned OFF. This breaker is sup-
plied current when the House battery switch is
activated.
Auto Bilge FWD
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt electri-
cal power to the automatic switch for the forward
bilge pump. This breaker is always supplied cur-
rent when the batteries are connected.
Auto Bilge AFT
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt electri-
cal power to the automatic switch for the aft bilge
pump. This breaker is always supplied current
when the batteries are connected.
High Water Alarm
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt electri-
cal power to the automatic float switch in the aft
bilge that activates the high water alarm in the
hardtop switch panel. This breaker is always sup-
plied current when the batteries are connected.
Sump
A continuous power circuit breaker that protects
the circuit that supplies continuous 12 volt elec-
trical power to the cabin drain sump pump. This
breaker is always supplied current when the house
battery is connected.
https://www.boat-manuals.com/