Scientific Atlanta PowerVu D9228, Installation And Operation Manual

Page: 92 / 110

C-6 Alt Mode Operation 707-161 Rev. 3
Alt Mode Operation
(continued)
Key Function Description
7 Change download mode Select (unforced) download mode using the Up/Down
arrow keys. Options are: none, one, all. Setting this to
one starts a download, if a download is present.
8 To be determined Reserved for future use
9 Bit rate display
This can be set to display the bit rate of:
•
current video PID being monitored
•
the entire incoming transport stream
•
each individual transport output (ASI-1,
ASI-2, SWIF-1/DHEI-1, SWIF-2/DHEI-2)
•
any specific PID within the transport.
Procedure:
Tune the MDR to a signal.
Channel change to the specific program for its bit
rate information
While in the Video mode (i.e. On-screen Menu is
not selected), Press the ALT key three times.
The display should show “ A3 ”, indicating ALT
mode 3
Press the 9 key
The display will show “ oP bPS ”
From here you can select the following options by
using the UP ARROW cursor and DOWN
ARROW cursor. (
see table below ). Alternately one
may also enter a specific PID # (in decimal).
Press the “ SELECT ” key to select option
The front panel will now display the bit rate and it
will be constantly updated.
Press any key to return to normal mode. The
display will show the current program number.
Repeat the steps for any additional bit rate
information