707-161 Rev. 3
Using the Menus
3-7
R21 -
Configuration Menu
Introduction
The
R21-Configuration Menu
lets you configure inputs and outputs, and view any of the
output signals.
How to display
1.
R10-Main Menu
→
Config button
Description
Ref Description
A
RF-1 and RF-2
buttons represent the two RF inputs located on the back
panel. If the uplink signal you want to use is connected to one of these
inputs, highlight the corresponding input and then press the front panel
MAP key. If the signal is connected to the ASI input, highlight the ASI
input (Ref. B) and then press the front panel MAP key.
Input RF-1 or RF-2 must first be set up via the
R31/32-RF Setup Menu
to
receive from the desired signal source. To access the
R31/32-RF Setup Menu
:
1. Highlight the RF input.
2. Press the front panel SELECT key. The
R31/32-RF Setup Menu
is
displayed.
3. Set up the source signal by referring to
R31/32-RF Setup Menu
description later in this chapter.
Note:
A selected input that is displayed in red means that no signal is
being received on that input.
continued on next page
Summary of Contents for PowerVu D9228
