707-161 Rev. 3
Possible Output Configurations
F-7
Possible Output Configurations
(continued)
Map Menu
Setting up the IRT for PID-overlay mode
1. Tune the IRT to HITS 3 .
2. Create 12 services on the DAC so that the MPEG numbers are consecutive.
3. Create a channel map associated with the new digital services.
4. Reboot the IRT and wait until active commands > 0.
5. Connect the DHEI cable from the MDR DHEI output to the IRT Expansion
Output. You can use a straight-through DHEI cable to interconnect these
units. Different cable lengths are available: S-A Part number 774-487 (120”
length); GI Part number 415415-00X-00 where X=1,2,3 for 20”, 40”, and 80”
respectively.
6. Enable the Output expansion port of the IRT. On the IRT front panel, go to
DHEI Control, Configure: Input Port (Not Selected), Output Port (Selected).
7. The Video and Audio PIDs from the MDR are now PID-overlapped onto
programs described by the HITS feed.
8. Encrypt the digital services on the DAC.
9. Authorize the set-top for those services.
Summary of Contents for PowerVu D9228
