Scientific Atlanta PowerVu D9228, Installation And Operation Manual

Page: 70 / 110

3-24 Using the Menus 707-161 Rev. 3
R34
- Misc Diagnostics Menu
(continued)
Ref Description
6 ISE#6 Authorization
7 ISE#7 Authorization
8 ISE#8 Authorization
9 ISE#9 Authorization
10 ISE#10 Authorization
11 ISE#11 Authorization
12 ISE#12 Authorization
13 ISE#13 Authorization
14 ISE#14 Authorization
15 ISE#15 Authorization
16 ISE#16 Authorization
17 The MSM Walrus was reset (Debug Only)
18 The DSC Walrus was reset (Debug Only)
19 There is an error in the MSM (Debug Only)
20 There is an error in the DSC (Debug Only)
21 DSC Dual Port RAM Error (Debug Only)
22 MSM Dual Port RAM Error (Debug Only)
23 Transport Error in FPGAs (Debug Only)
24 Ethernet Error (Debug Only)
25 PSI Error (Debug Only)
26 NVM Write Error (Debug Only)
27 Over-the-air Download Failure (Debug Only)
28 ISE/UART H/W Error (Debug Only)
29 Loss of Data Stream Sync (Debug Only)
30 Bit Error Rate to high (<1 dB above threshold)
31 No Lock on RF Carrier
32 Any error in MDR
To display the alarm definitions, highlight the left and right arrow buttons
(Ref. E) and press the front panel SELECT key.
B Alarm indicators : these 32 bars correspond to the 32 possible alarm
conditions (see A above). When an alarm occurs, the color of its
corresponding bar changes to red. An amber-colored bar means that an
alarm occurred previously but is now clear.
continued on next page