Scientific Atlanta PowerVu D9228, Installation And Operation Manual

Page: 54 / 110

3-8 Using the Menus 707-161 Rev. 3
R21
- Configuration Menu
(continued)
Ref Description
B
DVB ASI button represents the ASI input on the back panel. If the input
stream you want is on the ASI input, highlight this button and press the
front panel MAP key.
Note: A selected input that is displayed in red means that no signal is
being received on that input.
C This pipe is automatically connected to whichever input signal you select
(either RF-1, RF-2, or DVB-ASI). Only one input can be selected at any
time.
To select the input:
1. Highlight the input (RF-1, RF-2, or DVB-ASI).
2. Press the front panel MAP key. The input is routed to the program
button (Ref. E).
Note: A broken pipe indicates that no valid signal is present on the
selected input.
D Remap All button: when you select this button, the MDR is automatically
configured with the following settings:
• The ISEs are assigned to the first 16 programs in the input.
• All programs elementary streams are mapped to outputs.
• All PSI/SI MPEG tables are mapped to outputs.
Note: Selecting the Remap All button causes all existing settings for
programs and PSI/SI to be lost for the current Preset.
After you use this button, go to the
R33-Map Menu
to remove any PIDs that
should not be mapped to outputs.
continued on next page