Scientific Atlanta PowerVu D9228, Installation And Operation Manual

Page: 29 / 110

707-161 Rev. 3 Getting Started 1-5
Back Panel
(continued)
Ref Type Description
H Type F
connector RF inputs: provide RF signal input, remote LNB power for
use when no external LNB power source is available plus
automatic 22 kHz tone signaling for dual-Ku band LNB
operation.
I 26-pin high
density
connector DHEI –1/2. DHEI output of MPEG-2 packets. DHEI Pinouts
are as follows:
Pin 1 GND Pin 14 NC
Pin 2 NC Pin 15 PDATB0-
Pin 3 NC Pin 16 PSYNCB0-
Pin 4
NC
Pin 17
SIGNAL GND
Pin 5
NC
Pin 18
NC
Pin 6 NC Pin 19 R
Pin 7 NC Pin 20 REFCLKB0-
Pin 8 NC Pin 21
Pin 9 SIGNAL GND Pin 22 PCLKB0-
Pin 10 NC Pin 23
Pin 11 NC Pin 24
Pin 12 NC Pin 25 SENSEBOL
Pin 13 NC Pin 26 NC
J BNC
connector ASI-1/2: provide ASI output of MPEG-2 packets.
K
ST
(fiber optic) SWIF-1/2: used to output MPEG-2 packets.
L
Euro-Type
(pluggable) Not available in CE (International) version: Two separate
terminal blocks (Alarm 1 and Alarm 2) provide alarm
output signals for connecting to an external alarm device.
You can program alarm activation criteria, depending upon
your specific application, (for example, in the event of a
receiver error condition due to signal loss, receiver de-
authorization, and so on), where an alarm output signal can
cause alarm detection equipment to switch over to a spare
or auxiliary (standby) equipment.
continued on next page