Scientific Atlanta PowerVu D9228, Installation And Operation Manual

Page: 90 / 110

C-4 Alt Mode Operation 707-161 Rev. 3
Alt Mode Operation
(continued)
ALT Mode 2
Key Function Description
0 Network ID Displays the Network ID. The network ID is also
available in the LNB-1 or LNB-2 Setup Menu.
1 Transport Stream ID
(display) Displays the transport stream ID. This information is
also displayed in the LNB-1 or LNB-2 Setup Menu.
2 Select Preset Allows you to switch Presets.
3 Lock Level Allows you to switch lock levels.
4 Display Error Displays current diagnostic errors.
5 Power LNB Y/N Displays which LNB configuration was selected (on, on
with compensation, off), and can be changed using the
up and down arrow keys. You can also edit this in the
LNB-1 or LNB-2 Setup Menu.
6 L.O. Freq #1 Displays local oscillator frequency 1. To edit this
frequency, press YES, enter the desired frequency, then
press YES again to save You can also edit this in the
LNB-1 or LNB-2 Setup Menu.
7 L.O. Freq #2 Displays local oscillator frequency 2. To edit this
frequency, press YES, enter the desired frequency, then
press YES again to save. You can also edit this in the
LNB-1 or LNB-2 Setup Menu.
8 Crossover Displays the crossover frequency. To edit this
frequency, press YES, enter the desired frequency, then
press YES again to save. You can also edit this in the
LNB-1 or LNB-2 Setup Menu.
9 Monitor Type Displays which video format the monitor video is
configured for (NTSC, PAL N, PAL M, and so on). Use
the arrow keys to change the setting. You can also edit
this in the Misc Setup Menu.
continued on next page