F-6
Possible Output Configurations
707-161 Rev. 3
Possible Output Configurations
(continued)
1. On the R21-Configuration menu, move the cursor to the ^ arrow above the
center box R21-E, cycle through to the program requiring PID remapping,
then press SELECT to enter the MAP Menu (R33).
2. Make sure the Mode Selection is Prog, so that PIDs associated with a
particular program can be re-mapped. Cursor to Video PID and type in an
Out PID in accordance with the PID Number Convention table above.
Cursor to the Audio PID and perform PID remapping in a similar fashion.
Make sure all other PIDs (for example, PMT, ECM, and so on) are not routed
to outputs. Only Video and Audio PIDs need to be routed.
Map Menu
Program 1
In PID
Stream
Out PID
Routed to Outputs
1120 AC-3
Audio 17
Yes
1160 Video
16
Yes
5010 PMT
No
6010 ECM
No
3. Change the mode to PSI. You may see stream types such as PAT, CAT, NIT,
SDT, TDT, EMM, and so on. Make sure none of these PIDs is routed to the
output, as shown in the following illustration.
continued on next page
Summary of Contents for PowerVu D9228
