Schwing SP 1800-D, Original Operating Instructions

Page: 270 / 390

4.10.1-2
005.150.01-EN
S UPPLEMENTARY EQUIPMENT : ROTARY COMPRESSOR A B C D E F G CHAP:
Z3 Check oil level (before every commissioning)

4.55
Z4 Oil change with
ROTOR OIL 8000 F2
 
4.55
Z5 Renew oil filter
 
4.55
Z6 Renew oil return valve
 
4.55
Z7 Clean/renew air suction filter
 
4.55
Z8 Clean oil cooler

4.55
Z9 Renew oil separator cartridge

4.55
C ONCRETE PUMP : A B C D E F G CHAP:
B1 Flush water box

3.35
B2 Check water box for deposits, clean as required

3.35
B3 Change hydraulic oil filter every six months or after 15000 m³ of pumped concrete,
whichever comes first!
 
4.20
B4 Check fixing of pumping pistons

4.43
B5 Lubricate grease nipple on rock valve, slewing cylinder, agitator and filling hopper

4.40
B6 Check clamping screws of the rock valve swivel head for tightness

4.40
B7 Check screws of the rock valve cover for tightness

4.40
B8 Check axial play of the rock valve slewing shaft

4.40
B9 Check seal of the rock valve slewing shaft

4.40
B10 Check cutting ring of the rock valve

4.40
B11 Check pressure accumulator**
  
4.23
B12 Technical safety inspection of the pressure accumulator**

4.23
** = if available
Time interval in the following maintenance schedule:
A = daily or 10 operating hours B = weekly or 50 operating hours C = monthly or 200 operating hours
D = quarter-annually or 500 operating hours E = semi-annually or 1000 operating hours F = annually or 2000 operating hours
G = every 2 years whichever comes first!
 = CHECK  = LUBRICATE  = CLEAN  = CHANGE / After initial commissioning:    