Schwing SP 1800-D, Original Operating Instructions

Page: 42 / 390

1.7-6
005.142.08-EN
11. Start of regeneration (from point 3 at the
latest).
a. Allow the machine to idle unencumbered.
b. Switch on the upgraded key-operated
switch (1) (
Fig. 12
).
c. Press button for at least 3
seconds.
d. Regeneration starts within the next 10
minutes (the motor may still have reach
operating temperature, for example).
12. Carrying out regeneration
a. The motor carries out regeneration
independently.
b. Do not attempt to carry out any machine
functions during regeneration.
c. Regeneration must not be interrupted.
d. The process can last up to approx. 30
minutes.
e. The motor independently adjusts its
speed.
13. End of regeneration
a. The indicator goes out. Attention,
sometimes the indicator goes out on
starting regeneration.
b. The clogging indicator is set to "0", this
means that the black bar is no longer
visible on the display.
c. Any increases in motor speed return to
idling.
d. Turn back the key-operated switch.
e. Start working operation.
Fig. 11; control panel
Fig. 12; the “Regeneration” key-operated switch