Schwing SP 1800-D, Original Operating Instructions

Page: 205 / 390

3.51-1
004.552.01-EN
RESTORE TRANSPORT READINESS
OBSERVE
SAFETY MANUAL
- Clean the machine and switch off concrete
pump, auxiliary drive and drive motor.
- Disconnect the remote control cable from the
machine.
- Mount wheels, if necessary.
- Secure machine with wheel wedges.
- Lay a suitable spacer (e.g. item no.: 1095646)
under the supporting dish of the crank
support (Fig. 1).
MECHANICAL OUTRIGGER
- Lift the machine at the front somewhat with
the crank support (Fig. 1) until the front
supports 1 (Fig. 2) are unburdened.
- Retract the front supports and secure them
with socket pins and split pins.
- Unburden the rear supports 2 (Fig. 2) by
lowering the machine somewhat at the front
with the crank.
- Retract the rear supports and secure them
with socket pins and split pins.
- Place the machine with the crank support in a
horizontal position.
Fig. 1
Fig. 2