Schwing SP 1800-D, Original Operating Instructions

Page: 83 / 390

2.3 Stationary machines
2.3.1 Setup site
Stationary machines are generally used on a construction site for a
lengthy period. For this reason, site management should prepare the
setup site carefully. Site management must deliver the necessary
documents in good time in order to be able to prepare the founda‐
tions, base plates or similar on time.
When selecting the setup site, remember that the machine must be
dismantled and transported away again at the end of its use on site.
The ambient conditions may change as construction work progress‐
es.
Please also observe the
(Setup site P. 36)
section.
2.3.2 Stationary placing booms
Stationary placing booms can be erected on tubular columns, lattice
booms or other base structures. The base/structural elements to
which the base structure is fixed must be able to withstand the forces
and moments transferred via the base structure, as specified in the
manufacturer’s information. The base frame of the base structure
must be fastened in place so that it is level on the base/structural ele‐
ments in every direction. Check the documentation provided by the
manufacturer in this regard and the corresponding notes in the oper‐
ating instructions.
2.3.3 Lifting machines and components
Machines which are transported to the setup site in individual parts or
not under their own power must only be lifted with suitable lifting
equipment in accordance with the specifications in the Operating In‐
structions. The lifting gear on the machine must be capable of accept‐
ing the lifting equipment and lifting the load. Noone should stand un‐
der suspended loads. Before work is started, a subject expert must
check that the assembled machine is working properly.
2.3.4 Loading and transporting
Only use suitable means to load and transport stationary machines.
Ensure that noone can be injured by the machine tipping over or slip‐
ping.
Safety Manual
Concrete delivery and placing machines
01/2018 Rev16 EN
35