Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A
23
Connecting the foot control unit
Place the frontal foot section cover on the foot
section as shown in Fig. 23.
Pull the connecting cable of the foot control (3)
through the recesses on the bottom of the foot
section cover.
Fig. 23
Feed the connecting cable through the foot section
cover
1) Connector socket 2) Frontal foot section cover 3)
Connecting cable 4) Foot control unit
Fig. 24
Connecting the foot control unit
1) Connector socket 2) Connector plug 3) Connecting
cable 4) Foot control unit
The connector plug features a nose.
Turn the connector plug so that, when it is
plugged in, the nose fi ts into the corresponding
groove in the connector socket.
Insert the connector plug of the connecting
cable into the connector socket. Gently push the
connector plug until it engages.
Secure the connector plug with a locking plate
and two wing nuts as shown in Fig. 25 (insert top
left).
Fig. 25
Securing the connector plug
1) Retaining pin 2) Wing nuts 3) Locking plate 4)
Connector plug