Safety-related Information
10
Operating Manual XCx 300 / 500 / 540 Version 09/08
1.5
Maintenance
Measuring and testing on active devices must be carried out in
accordance with the regulations and instructions of the VBG 4.0
accident prevention regulation. The appropriate power tools must be
used.
Repairs on control components must be carried out at repair shops
authorised by SCHLEICHER. Opening the components and repairs by
unauthorised personnel may lead to personal injury or damage to
property.
Always be disconnected the device from the mains before opening it
(either disconnect the mains plug or use the cut-out switch).
Control modules may only be replaced when the power is switched
off. Disassembly and assembly must be carried out according to the
directives for mechanical assembly.
Fuses may only be replaced with those types specified in Technical
Data.
Batteries may only be replaced with those types specified in Technical
Data. Batteries must always be disposed as hazardous waste.
1.6
Dealing With Used Batteries
When the batteries in the automation system are dead they must be
disposed of in a battery return system or through public waste
disposal facilities.
Batteries should be fully discharged before disposal. A battery is
discharged when the function of the device is impaired due to
insufficient battery capacity.
When batteries for disposal are not fully discharged precautions must
be taken to prevent short circuits. For example by sticking tape over
the poles of the battery.