Installation
16
Operating Manual XCx 300 / 500 / 540 Version 09/08
3.1.3
Fixing the XCx to DIN rail
Use DIN rail type TS 35 mm / 7.5 to DIN EN 50022.
The DIN rail must be attached with a good electrical connection to an
electrically conducting carrier board.
DIN rail installation is sufficient for normal mechanical
loads.
For higher mechanical loads please refer to "Fixing
with screws" (only XCx 500 and XCx 540.
Assembly
A
Place device with guide (1)
on DIN rail (2).
B
Press until the device
engages.
Figure 6:Fixing the XCx on DIN rail
Disassembly
C
Push device down.
D
Pull away while pushing
down.
Figure 7: Disassembly the XCx