Schindler 3100/3300/6300
J 43402603 / 01
61/269
Copyright © 2017 INVENTIO AG
Shaft Access
Overview
Shaft Exit Overview
–
In general, before accessing or exiting the car roof or the pit, the stopping device
must always be activated to avoid the risk of movement due to activation of the other
panel.
–
The activation of the TSD21 lever (and the extraction of the balustrade, if any) does
not activate top-of-car inspection, therefore movement by activation of pit inspection
is possible, except before the first activation of top-of-car inspection.
–
After having exited the pit, the technician can use the top-of-car inspection to
move to the top floor in order to reset the safety system in the
control cabinet
/
MR.
3.9.2.2
Inspection Operation at Top of Car with TSD21
The whole sequence for the inspection at top of car with TSD21 consists of the following
steps:
–
Preparation for entering car roof
–
Activating the inspection mode
–
Inspection operation
–
Deactivation of inspection mode
–
Reset of TSD21.
Car Top Access
Pit Access
Doors Access
Monitoring
Short Head
and Normal Pit
Activate TSD21 lever
and extract balustrade (if
any)
Activate top of car
inspection
Direct access to pit,
activate pit inspection
(Same as without
TSD21)
On all doors giving
access to the car
roof (for example,
except doors on
lowest landing)
Short Pit and
Normal Pit
Direct access to top of
car,
activate top of car
inspection
(Same as without
TSD21)
On car roof, activate
TSD21 lever
1)
On car roof, cycle top
of car inspection
Access pit, activate
pit inspection
1) Foldable balustrade only required if short head.
On all doors giving
access to the pit
Short Head
and Short Pit
Activate TSD21 lever
and extract balustrade (if
any)
Activate top of car
inspection
On car roof, activate
TSD21 lever and
extract balustrade (if
any).
On car roof, cycle top
of car inspection
Access pit, activate
pit inspection
On all doors
Car Top Exit
Pit Exit
Short Head
and Normal
Pit
Deactivate TSD21 lever and
retract balustrade (if any)
Reset safety device
Pit inspection reset according to
EN81-20
(Same as without TSD21)
Short Pit and
Normal Pit
(Same as without TSD21)
On car roof, de activate TSD21
lever
Reset safety device
Short Head
and Short Pit
De activate TSD21 lever and
retract balustrade (if any)
Reset safety device
On car roof, de activate TSD21
lever and retract balustrade (if any)
Reset safety device
