Schindler 3100/3300/6300
J 43402603 / 01
23/269
Copyright © 2017 INVENTIO AG
–
by the fire emergency key switch, located on main floor or fire detection contact
(BR1 + KBF)
–
by the fire emergency key switch, located on main floor with alternative key on
defined floor in case of fire in main floor
(BR1 alternative)
.
(*) by the fire emergency key switch, located on main floor
(BR1 (NO))
, car(s) remains
blocked with closed doors.
Fire emergency controls BR2 / BR3
BR2/BR3 control allows the elevator (or one of the elevators if duplex) to be used by the
fire brigade to make trips for fire fighting purposes. When the fire fighting switch is
activated, the elevator travels immediately to the fire recall floor, and opens its doors.
Then use of the car is reserved for the firemen. In the case of a duplex and BR2 the
other elevator remains in normal service. In the case of duplex and BR3, the other
elevator remains at the fire recall floor. Fire fighting service can only be deactivated
when car is at fire recall floor with doors fully open.
–
Fire emergency key switch, located on main floor
(BR2)
.
–
Fire emergency key switch, located in the car
(BR3)
.
–
Automatic evacuation to the nearest floor
(option on elevator control)
In case of power failure, an evacuation travel is initiated in up or down direction,
depending on the load in the car. When the car arrives at the nearest floor, the doors
open and remain open.
–
Independent control
(car reservation)
When the car reservation key is turned on, the car is reserved for exclusive use such
as car interior cleaning or loading. Landing calls are ignored (allocated to the other
elevator if duplex).
–
Out of service function
The out of service switch is used to take one elevator out of service. Currently
registered car calls are served before the car returns to a specified recall floor, where
it’s blocked after the doors have opened and closed. Further travel indicator for
collective controls and car position indicators on the landings are de activated.
–
Floor lighting control
Destination landing light automatically switches on when elevator arrives to the floor.
–
Pre opening doors
The door opens just before the car comes to a stop at landing in order to save time.
–
Pre announcing arrows with / without acoustic signal
(Collective control)
The indication to the passengers for the direction in which a car will travel next, using
up or down arrows.
–
Automatic car light
When the car is not used for a period of time with door closed, the light is switched
off.
–
Automatic return to main floor from all floors
The car is automatically sent to the main floor after a time of inactivity (default 2
min.). There it remains with door closed.
–
Automatic return to main floor when car stands below the main floor
The car is automatically sent to the main floor after 5 s. of inactivity below the main
floor. There it remains with door closed.
–
Voice announcement
(selected languages)
The specific device located on the car generates audible synthetic messages:
–
Floor position of the car
–
Penthouse option
In case the elevator gives direct access to the top apartment in a building, the control
box can be installed on the floor immediately below the top one.
–
Guest control (option)
Visitors control is an option linked with the "Penthouse option". When a penthouse's
visitor dials the top floor on the COP, the landing button at the penthouse floor makes
an intermittent acoustic signal and a visual signal blinks.
