8
3.8. Installation warnings
Failure to follow all of the requirements may result in property damage, bodily injury, or even death.
This insert / ZC-fireplace must be installed by a qualified installer who has gone through a training program
for the installation of direct vent gas inserts / ZC-fireplaces.
This insert / ZC-fireplace must be installed in accordance with all local codes, if any; If not, in USA. Follow
ANSI Z223.1 and NFPA 54 (88). In Canada follow CAN/CGA B-149.
Manufactured or mobile home installation must conform with: USA, Manufactured home construction and
safety standard, title 24 CFR, part 3280 or when such a standard is not applicable ANSI/NCBCS A 225.1; In
Canada, CSA Z 240.4. This insert / ZC-fireplace may be installed in manufactured housing only after the
home is site located.
This insert / ZC-fireplace is designed to operate on natural gas or propane (LP).
All exhaust gases must be vented outside the structure of the living-area. Combustion air is drawn from out-
side the living-area structure.
Notify your insurance company before hooking up this insert / ZC-fireplace.
The requirements listed below are divided into sections. All requirements must be met simultaneously. The
order of installation is not rigid – the qualified installer should follow the procedure best suited for the instal-
lation.
Summary of Contents for 70 gas insert / ZC-fireplace
