10
3.10. Securing the insert / ZC fireplace to the construction.
Due to the shift in center of gravity when the door is opened, it is nessesary to secure the insert / ZC-fireplace to the
construction.
To secure the insert / ZC-fireplace, drill two holes as shown in Figure 1.
•
On a stone or masonry construction use a 5/16 drill. Use the skrews and plugs delivered. Skrew in the skrews
to ¼” above the surface.
•
On wood or other soft materials, use a 5/32 drill. Use the only the skrews delivered. Skrew in the skrews to
½” above the surface.
Figure 1
Summary of Contents for 70 gas insert / ZC-fireplace
