50
7.7. Adjusting the blower speed (optional)
The blower helps transfer the heat from the insert / ZC-fireplace to the room. It will not turn on until the insert / ZC-
fireplace is up to temperature (approximately 15 minutes after starting). See the illustration below for instructions.
OFF
Turn the dial all the way counter-
clockwise until it clicks off.
Low
The high position is all the way
counter-clockwise, without
clicking off.
High
Turn the dial all the way
clockwise.
Blower
Summary of Contents for 70 gas insert / ZC-fireplace
