ACU-100 SATEL
33
Fig. 15. Configuration of the ACU-100 controller in D
LOAD
X program. Given under information
on the module type and address is the version of its firmware. The wireless devices have
been registered in the controller as recommended earlier in this manual: the devices which
occupy both zones and outputs in the system were added first, while the devices taking up
zones only were added after them. The radio signal level tester was added last.
Such diagnostic functions as S
IGNAL LEVEL
, C
OMMUNICATION QUALITY
and R
ESTART
COMMUNICATION TEST
in the D
LOAD
X program are available in the W
IRELESS DEVICE
window.
