Two-way wireless system ABAX
ACU-100
8
The functional outputs may be connected to suitably programmed zones of the control panel
(zone type, way of reaction, etc.). Thus the control panel will inform of any problem indicated
by the controller functional output. Having obtained information on the occurrence of
a problem, it can be thoroughly diagnosed by means of an LCD keypad or a computer
connected to the controller.
If the controller operates in conjunction with the CA-64 control panel, connecting the TPR
output is unnecessary, because information on tampers of wireless devices is transmitted
through the communication bus.
Where the controller operates together with the INTEGRA series alarm control panels, the
functional outputs need not be connected. In this configuration all problem-related information
is sent to the control panel through the communication bus.
3. W
IRELESS DEVICES INTERFACING WITH THE CONTROLLER
3.1 ACX-100
I
NPUT
&
OUTPUT EXPANSION MODULE
•
4 control inputs
•
8 outputs, OC type
•
communication
bus
•
tamper
contact
•
power supply: direct voltage 12V (±15%)
3.2 ACX-200
H
ARDWIRED ZONE
&
OUTPUT EXPANDER
•
4
zones
•
4 relay outputs
•
tamper
contact
•
power supply: direct voltage 12V (±15%)
3.3 APD-100
W
IRELESS PASSIVE INFRARED DETECTOR
•
digitally processed signal from pyroelement
•
high resistance to interference
•
adjustable detection sensitivity
•
remote configuration of parameters
•
changeable Fresnel lenses
•
tamper
contact
•
power supply: lithium battery, CR123A 3V
3.4 AMD-100
W
IRELESS MAGNETIC DETECTOR WITH ADDITIONAL INPUT
•
two reed switches
•
input to connect any outdoor detector of NC type
•
remote configuration of parameters
•
tamper
contact
•
power supply: lithium battery, CR123A 3V
