Sartorius Combics CAH1 Operating Instructions Manual Download

Page: 9 / 168

Operating Instructions Combics Indicators

CAH1 models: Remove transport locks

Place the weighing platform at its installation location, remove the

weighing pan.

Remove the transport lock: Remove screw

Loosen screw

Turn the mounting bracket 180° and re-secure screw

Re-attach screw

to the lever

The transport lock must be re-installed before transporting the weighing platform.

Weighing Platform, Leveling

The weighing platform must be exactly level to ensure reproducible weighing results
every time. Therefore, the weighing platform must always be re-leveled after it has
been moved to a different location.

Remove the weighing pan.

Loosen the lock nuts using a wrench (SW17).

Use a SW5 Allen key to screw the leveling feet in/out.

Turning the leveling feet clockwise lifts the weighing platform,
turning the leveling feet counterclockwise lowers the weighing platform.

Installation

Summary of Contents for Combics CAH1









































































































































































Search results

Summary of Contents for Combics CAH1

Reviews:

Related manuals for Combics CAH1

Brands by name

Popular brands

Sartorius Combics CAH1, Operating Instructions Manual

Search results

Summary of Contents for Combics CAH1

Reviews:

Related manuals for Combics CAH1

Brands by name

Popular brands